XRotor FPV G2 ESC (4in1) 65A Specifications
- Continuous Current: 65 A (per motor)
- Burst Current: 80 A (per motor)
- Input Voltage: 3 – 6S Lipo
- BEC output: 5 V / 0.6 A
- Firmware: BLHeli_32
- Modes: DSHOT (600, 300, 150), including bi-directional for RPM filtering, OneShot
- Size: 52 x 42 x 6.6 mm (30.5 mm hole distance)
- Weight: 32 g (including wires)
- Current meter scale: 11.75 mV/A (Betaflight/INAV scale: 117, ArduPilot: 85 A/V)
Includes:
- 4-in-1 ESC with 680 uF / 35 V capacitor and 12 AWG battery cables pre-installed
- XT60 connector
- 10-pin cable for connection to flight controller (some wires need to be removed, refer to the guide linked below)
- Manual
Refer to the RADIX 2 4-in-1 ESC Connection guide for information on how to connect the XRotor FPV G2 ESC (4in1) 65A to the RADIX 2 or RADIX 2 HD.