RE1'S COMPANION
BRAINFPV mPB V2
The RE1 can be directly plugged into the newly updated Mini Power Board Version 2 (RE1-mPB V2). This power distribution board enables a simple, clean build requiring no wiring between the two. mPB uses an LC filter to reduce motor noise and protect your FPV components from voltage spikes, resulting in a noise-free FPV experience. Highly accurate voltage/current sensing up to 6S/130A lets you always know how much battery you have left.
MSRP: $25 $20 BUY
Status: In stock. Orders placed before 2PM EST typically ship the same day.
NEW AND IMPROVED
mPB V2 is an improved version of the original mPB and offers several improvements, like 5mm stacking height and 6S compatibility.
MORE POWER
FEEL THE VOLTAGE
Fly with up to 6S.
SLENDERIZED
BETTER DESIGN
5mm stacking height (instead of 8mm).
DON'T WORRY ABOUT RUNNING LOW
BATTERY MONITOR
Accurate voltage and current measurement enable you to keep tabs on your battery usage.
TECHNICAL SPECIFICATIONS
Power Outputs: 5V (1A), 10V (1A), filtered output (1A). 10V output can be switched to be a second 5V (1A) output by bridging a jumper.
Power Input: 10V - 26V (3S - 6S LiPo battery)
Voltage Measurement: 91mV/V output (1:11 divider ratio)
Current Measurement: 25mV/A output
Filtering: LC filter to reduce motor noise and protect components from voltage spikes
Copper thickness: 4 oz (140 μm); 4-layer PCB
Maximum total Current to ESCs: 80A constant, 130A burst (10 seconds).
Stacking Height: 5mm
Power Outputs: 5V (1.25A), 12V (150mA), filtered output (750mA).
Power Input: 6.5V - 20V (2S - 4S LiPo battery)
Voltage Measurement: 151mV/V output
Current Measurement: 25mV/A output
Filtering: LC filter to reduce motor noise and protect components from voltage spikes
Copper thickness: 4 oz (140 μm); 2-layer PCB
Maximum total Current to ESCs: 70A constant, 120A burst (10 seconds).
Stacking Height: 8mm