RADIX 2 Flight Controller
$99.00
30×30 H7 fc w/ full graphic OSD for ANALOG FPV
* NEW 2024 BATCH: REVISION 2.0*
Includes:
- RADIX 2 flight controller; REVISION 2.0
- Sweet stickers
- Silicone anti-vibration grommets 4x
- 5-pin cable for motor outputs 5 to 8
- BrainFPV 4-in-1 ESC cable kit (cables and connectors to make a cable that works with any 4-in-1 ESC with a JST-SH 7 pin, 8 pin, or 10 pin connector)
In stock
22
People watching this product now!
Description
MOST POPULAR | MOST RELIABLE | FOR ANALOG FPV
RADIX 2 H7 FLIGHT CONTROLLER
MADE IN THE USA!
Since early 2022, all RADIX 2 Flight Controllers are being manufactured locally in Oregon, USA!
FPV’S MOST POPULAR FLIGHT CONTROLLER EVER
H7 | FULL GRAPHICAL OSD
Radix 2 Flight Controller
The RADIX 2 has a blazing fast H7 processor running at 480 MHz, a full graphical OSD, a built-in voltage regulator that can handle up to 8S (35 V), to 8 motor outputs, driverless flashing, and more!
COMPATIBLE FOR YOUR KIND OF FLYING
racing | cinematography | octocopters | autonomous
RADIX 2 DOES IT ALL
The RADIX 2 is designed to be compatible with any 4-in-1 motor controller (ESC) on the market. For octocopters, you can use the included 5-pin cable to connect a second 4-in-1 ESC for motors 5 to 8. All outputs fully support bi-directional DSHOT that enables the motor controllers to send back real-time telemetry that is used by the flight controller to perform adaptive RPM based noise filtering.
CUSTOMIZATION FEATURES
ON-SCREEN-DISPLAY
Customize your flight and add features such as altitude, horizon, your pilot logo, and more!
PREMIUM FIRMWARE OPTIONS
HAND PICKED ORGANIC QUALITY
All firmware is 100% vegan
RADIX 2: REVISION 2.0
RADIX 2 & RADIX 2 HD
SIMILARITIES
FEATURES AND SPECS
RADIX 2 SPECIFIC
Changes for RADIX 2 Revision 2.0 Released in 2024:
- Improved barometer: Infineon DPS310
- Improved 5 V voltage regulator that we also use in the RADIX 2 HD
- To learn how to use the RADIX 2, make sure to read the manual!
Additional information
| Features |
Analog ,Graphical OSD ,Plug and Play Connector |
|---|
TECHNICAL SPECIFICATIONS
BrainFPV RADIX 2 Technical Specifications
- New Processor: STM32 H7 processor running at 480 MHz with 1 MB RAM
- New Gyro: New Bosch Sensortec BMI270 gyro / accelerometer delivering superior flight performance
- New Baro: Latest generation Infineon DPS310 barometer for accurate altitude readings. Previous revisions used Bosch Sensortec BMP388 (Rev 1.0) or Omron 2SMPB-02B (Rev 1.2)
- Better OSD: Improved full graphical on-screen-display (OSD) with gray levels and transparency
- Dual camera input: Camera can be switched using a switch on the RC transmitter
- VTX pit switch: to turn on/off the video transmitter. Voltage for VTX can be 5 V or the battery voltage.
Note: The original RADIX 2 had over-current protection for the pit switch, which was removed in hardware revision 1.2 released in 2022. - 32 MByte built-in flash memory: 30 MByte available for logging and settings storage
- Driverless flashing with the BrainFPV USB mass storage bootloader. Simply copy the firmware file to the flight controller when connected to your computer. No more messing with DFU drivers
- RGB status LED with customizable color
- 8 motor outputs: all supporting bi-directional DSHOT for RPM filtering. All outputs are available on connectors for easy connection of one or two 4-in-1 motor controllers (ESC’s).
- 6 serial ports (UARTs): all with integrated inverters for S-BUS and other inverted protocols
- I2C port for external sensors
- RGB LED output
- Buzzer output
- Camera control output for configuring analog cameras
- Analog RSSI input
- 5 V regulator with 1.5 A output and up to 8S (35 V) input voltage
- USB Type-C connector
- Size: 37 x 37 mm (30.5 mm hole spacing)
- Weight: 7g
Changes for RADIX 2 Revision 2.0 Released in 2024:
- Improved barometer: Infineon DPS310
- Improved 5 V voltage regulator that we also use in the RADIX 2 HD
Changes for RADIX 2 Revision 1.2 Released in 2022:
- Improved barometer: Omron 2SMPB-02B
- TVS diode (“spike protector”) to protect 5 V regulator from voltage spikes
- Removed VTX pit switch over-current protection. Pit switch can supply up to 1.5 A
- Made in Oregon, USA!
You can use 2 4-in-1 ESCs for an octocopter. Holy mother of FPV! It comes with cables and connectors to easily make your own wiring harness.
To learn how to use the RADIX 2, make sure to read the manual!
